 We offer a wide range of SKF bearings, which conform to the special requirements on noisiness and rotation accuracy of internal ring, according to ISO standards for electric motor bearings.In 1991 SKF Group passed the certification, including ISO 90014 standard, and developed the new modern technologies of the rolling bearings production. Due to these technologies, total control of every bearing element and nonselective assembling, SKF Group obtained the quality, at which any standard bearing, coming off its conveyer, corresponds to the noisiness class QE6 and even to harder class QE5. At the same time any standard deep groove ball bearing with the bore diameter of inner ring up to 85 mm corresponds to the precision class P5 and noisiness class on the border between QE4 and QE5, and with the diameter from 85 up to 420 mm corresponds to the precision class P6 and noisiness class on the border between QE5 and QE6. In this connection SKF Group stopped marking the special suffixes in the bearing designations (QE6, P6 etc.) When ordering bearings for the electric motors application, please, take this fact into consideration. For example, instead of the required by you designation 6206/QE6 or 6206/P6, we will offer you the bearings with the designation 6206, which excel as per their parameters the classes QE6 and P6.
| 
